Luxr Urethane Enamel Paint
Luxr™ Urethane Enamel Paint is great for finishing and refinishing furniture, doors, trim and floors. It is nonhazardous, virtually odorless, and cleans up easily with water.
Luxr™ Urethane Enamel Paint is fast drying and can easily be applied by either spraying or brushing on. Our unique self leveling technology makes it very easy to apply. It will make your old furniture look like new again.
Actual colors may vary from the images displayed here. We strongly recommend that you view actual color samples before making a final color selection.
available in 1QT, 1GAL, 5GAL & 55GAL drum.
- No Top Coat Required.
- Available in over 1300 colors.
- Mold & mildew resistance
- Superior cleanability
Application Instructions
Stir/Mix thoroughly before using. Apply using either a brush, or airless sprayer. When spraying a #10 or #12 fine finish tip is recommended. For best results apply one coat on primed surfaces. Two coats are recommended on previously un painted surfaces or when changing the color. Allow the first coat to dry before applying a second coat.
For refinishing furniture lightly sand the surface and wipe clean with a damp cloth, or if old finish is sticky, clean with mineral spirits. Then simply apply the Luxr™ Urethane Enamel Paint in your choice of colors. 2 coats are recommended.
Ideal application temperature is between 45° F and 85° F. Do not use outside in temperatures of 35° F or lower or in direct sunlight on a hot day. Also avoid using outside in late afternoon or evening when there is a chance of moisture collecting on the wet film and preventing it from drying, or when there is a chance of rain.
Spread Rate . . . . . . . 350 – 450
% (NVM) . . . . . . . . . . . . .28 – 29
VOC’s . . . . . . . . . . . . . <49 (G/L)
UV Resistance . . . . . . . . . Pass
Mold & Mildew
Resistance . . . . . . . . . . . . Pass
Dry time:
to touch. . . . . . . . . . 30 minutes
to handle. . . . . . . . . 60 minutes
to topcoat. . . . . . . . . 30 minutes
to cured. . . . . . . . . .. . . . 7 days
