NaturalKote Water-Borne Urethane

NaturalKote™ Water-Borne Urethane is a high solids, solvent free, low odor polyurethane finish that has much less yellowing than many polyurethanes. It has excellent scuff and mar resistance, it also has very good water and chemical resistance. It gives a very nice smooth finish that is very easy to clean.

NaturalKote™ Water-Borne Urethane is a great finish to use on floors, cabinets, interior furniture, table tops, doors, trim, log cabin walls and ceilings and anywhere a high build finish is desired.

Click Image to Enlarge

Available in 1QT, 1GAL, 5GAL & 55GAL drum.

Application Instructions:
Stir container thoroughly before using. Do not shake in a power shaker. For best results apply material using an airless sprayer with a no. 10 fine finish tip. Material may also be applied using a soft bristled varnish brush or paint applicator pad. Allow the finish to dry thoroughly before reapplying (approximately 1 hour depending on environmental conditions). Sand between coats with 120-220 grit sandpaper. In most cases 2 coats are sufficient.

Spread Rate . . . . . . . 400 – 500
% (NVM) . . . . . . . . . . . . . . . . 30
VOC’s . . . . . . . . . . . . . . 50 (G/L)
UV Resistance . . . . . . . . . Pass
Mold & Mildew
Resistance . . . . . . . . . . . . Pass

Dry time:
to touch. . . . . . . . . . 30 minutes
to handle. . . . . . . . . 60 minutes
to topcoat. . . . . . . .. 30 minutes
to cured. . . . . . . . . .. . . . 7 days