Envista Interior Waterborne Glaze

Interior Waterborne Glaze effects are translucent water-based colors used to create antique finishes. For use over stains and paints. Glaze will add depth and character to any piece. Enjoy a top-performing glaze without the usual cleaning hassles or flammable hazards.

Click Images to Enlarge

Actual colors may vary from the images displayed here. We strongly recommend that you view actual color samples before making a final color selection.

available in 1QT, 1GAL, 5GAL & 55GAL drum.

Application Instructions

First seal and sand the surface. DO NOT APPLY DIRECTLY ON BARE WOOD. Mix thoroughly before using.

Always test the glaze for appearance on a scrap sample of the same type of wood. Apply by spray, brush or rag if needed. Apply to distressed and recessed areas. Glaze may be wiped off while still wet or left to dry and then sanded depending on the desired effect.

Dries to a powder in 15 to 25 minutes, and may be top coated in 30 to 45 minutes or when fully dried. (Not intended for use without top coating.) Sanding glazing and top coating should all be completed the same day. Top coat with 2 to 3 coats of Envista Urethane.

Temperature
Ideal surface, material and air temperature is between 65° – 80°F and humidity below 50%. Do not use when material or substrate temperature is below 60°F.

Clean Up
Water.

Storage:
Store in a cool dry place. DO NOT FREEZE! Product should be stored between 50° – 100°F. Close containers after use.